Working principle.
Freezing type compressed air dryer principle is based on a refrigerated dehumidification, when damp heat exchange of compressed air through theevaporator, the gaseous water compressed air condenses into liquid water, by the gas-liquid separator after the sewage outfall drain away.
Technical characteristics:
L integrated design, reasonable structure, no basis for the installation, convenient operation;
L adopt international famous brand refrigeration compressor, stable operation, low noise, low energy consumption, safe and reliable;
L the main refrigeration fittings chooses Danfoss (DANFOSS) brand;
L air flows through part of the use of spray treatment, avoid to compressed airpollution two;
L unique gas-liquid separation design and automatic drainage system, sewage more thoroughly;
L with alarm and processing functions of various fault.
Technical parameters:
Air cooled type cold and dry machine
And treatment capacity: 1 ~ 300Nm3/min
And working pressure: 0.6 ~ 1.OMPa (for 1 ~ 3.OMPa)
And the finished product gas dew point: -23 C (atmospheric pressure) and the inlet temperature of 45 DEG C: <
Pressure loss: less than or equal to 0.02Mpa – cooling: air
Water cooled type cold and dry machine high temperature type cold and dry machine
And treatment capacity: 5 ~ 500Nm3/min treatment capacity: 0.5 ~ 300Nm3/min
And working pressure: 0.6 ~ 1.OMPa (for 1 ~ 3MPa), working pressure: 0.6~.OMPa (for 1 ~ 3MPa)
And the finished product gas dew point: -23 C (atmospheric pressure), refined gasdew point: -23 C (atmospheric pressure)
And the intake air temperature: < 45 C, the intake air temperature: < 80 C
And the water inlet temperature, inlet water temperature is less than or equal to 32DEG C:: less than or equal to 32 DEG C.
And the water inlet pressure: 0.3 ~ 0.4MPa, 0.3 ~ 0.4MPa water inlet pressure:
Pressure loss: less than or equal to 0.02MPa, the pressure loss: less than 0.02MPa
- cooling: water – cooling: water, air cooling
Process flow diagram: