ZDH micro heat regeneration compressed air dryer
Tepefaction regeneration compressed air dryers is according to the pressure swing adsorption principle, a device for drying compressed air to. Has the advantages ofreasonable absorb heat and no hot two regeneration methods and the development of products, low temperature, high pressure in water by adsorption (work), in the high temperature, low pressure water is desorption (regeneration) process.
Dryer for Twin Towers structure filled with adsorbent, adsorption tower for drying,while the other was regenerated adsorption tower.
L product gas dew point is stable and reliable, regeneration and less gas consumption, low energy consumption;
L the humanization design, reasonable structure, convenient operation and maintenance;
L process using advanced program of reasonable control system, stable and reliable operation;
L failure in the micro mode can be switched automatically for a hot running mode;
L uses contactless solid-state switch heating control, PID temperature controltechnology;
Warning – a variety of fault and processing function;
L optional dew point control function, saving energy maximum;
L optional RS485/RS232 communication interface and linked control function.
Rated treatment capacity: 1 ~ 500Nm3/min
And working pressure: 0.6 ~ 1.0MPa (G) (for 1 ~ 3.0MPa (G))
And the finished product gas dew point: less than -40 DEG C (alumina) is less than or equal to -52 DEG C (molecular sieve)
And the intake air temperature: < 50 C
And the regeneration gas consumption: less than or equal to 6%
Pressure loss: less than or equal to 0.02MPa (G)
Process flow diagram: